nutrition and plant health
питание и здоровье растений
история продукта
historical way of production
уникальное сырьё
unique raw materials
технология о-райз
technology O-RISE
комплексные удобрения о-райз
O-RISE Complex fertilizers
Organomineral fertilizer of a new generation, a highly active complex of fulvic, humic and amino acids.
Contains a high concentration of macro-, micronutrients in chelated and organic form.
High-tech stable organochelate compound.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding, fertigation together with the NWR, or self-application
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Complex fertilizer in liquid form with humic, fulvic and amino acids.
The peculiarity of the product is the composition, enhanced with a complex of microelements by innovative eco-technology, which provides enhanced growth of the plant at each application of the preparation in a particular phase of development.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding, fertigation together with the NWR, or self-application
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
органические удобрения о-райз
O-RISE organic fertilizers
Special product for organic agricultural production O-RISE ORGANIC
The product was created taking into account the high requirements of international standards for organic fertilizers. Product was created with regard to the requirements international standards placed on organic fertilizer. The product is approved for use in organic production in accordance with the provisions of the State Standard 33980-2016 “Organic Product”. O-RISE Organic is ready to certification in accordance with the requirements of the federal law on organic products and on amending certain legislative acts of the Russian Federation NO.280-FZ of august 3, 2018.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Organic fertilizer O-RISE TROPIC in liquid form with cooper and boron is designed for agriculture in high temperatures, high and low humidity, soil deflation, limited use of water resources for irrigation.
O-RISE TROPIC was created in accordance with the high requirements of international standards that apply to organic fertilizers.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
моно удобрения о-райз
O-RISE mono fertilizers
Product for speed up the growth of plants in active development periods, preventive and curative control of sulfur deficit.
Innovative fertilizer O-RISE S (O-RISE SULFUR | Mono fertilizer) in liquid form with high concentration of sulfur in chelate form coupled with humic, fulvic and amino acids.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for speed up the growth of plants in active development periods, preventive and curative control of boron deficit.
Innovative fertilizer O-RISE B (О-RISE BORON | Mono fertilizer) in liquid form with high concentration of boron in organic form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of copper deficiency.
Innovative fertilizer O-RISE Cu (O-RISE Copper Mono Fertilizer) in liquid form with high concentration of copper in chelate form coupled with humic, fulvic and amino acids.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
A product for preventive and curative control of zinc deficiency.
Innovative fertilizer O-RISE Zn (O-RISE Zn | Mono Fertilizer) in liquid form with high concentration of zine in chelate form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for speed up the growth of plants in active development periods, preventive and curative control of iron deficit.
Innovative fertilizer O-RISE Fe (O-RISE IRON | Mono fertilizer) in liquid form with high concentration of iron in chelate form coupled with humic, fulvic and amino acids.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
моно-плюс удобрения о-райз
O-RISE mono-plus fertilizers
Product for preventive and curative control of boron and molybdenum deficit.
Innovative fertilizer O-RISE B+Mo (O-RISE BORON + MOLYBDENUM | Mono-plus fertilizer) in liquid form with high concentration of boron in organic form and molybdenum in organic form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and curative control of zinc and sulfur deficit.
Innovative fertilizer O-RISE Zn+S (O-RISE ZINC + SULFUR | Mono-plus fertilizer) in liquid form with high concentration of zinc in chelate form and sulfur in organic form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of boron and zinc deficiency.
Innovative fertilizer O-RISE B+Zn (O-RISE BORON + ZINC | Mono-plus fertilizer) in liquid form with high concentration of boron in organic form and zine in chelate form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of boron and manganese deficiency.
Innovative fertilizer O-RISE B+Mn (O-RISE BORON + MANGANESE | Mono-plus fertilizer) in liquid form with high concentration of boron in organic form and manganese in chelate form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of boron and iron deficiency.
Innovative fertilizer O-RISE B+Fe (O-RISE BORON + Iron Monoplus fertilizer) in liquid form with high concentration of boron in organic form and iron in chelate form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of copper and boron deficiency.
Innovative fertilizer O-RISE Cu+B (O-RISE Copper+Boron Mono-plus fertilizer) in liquid form with high concentration of copper in chelate form and boron in organic form coupled with humic, fulvic and amino acids.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of sulfur and copper deficiency.
Innovative fertilizer O-RISE S+Cu (O-RISE Sulfur+Copper | Mono-plus fertilizer) in liquid form with high concentration of sulfur in organic form and copper in chelate form coupled with humic, fulvic and amino acids.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of zinc and copper deficiency.
Innovative fertilizer O-RISE Zn+Cu (O-RISE ZINC+COPPER Mono-plus fertilizer) in liquid form with high concentration of zine in chelate form and copper in chelate form coupled with humic, fulvic and amino acids.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Product for preventive and therapeutic control of molybdenum and copper deficiency.
Innovative fertilizer O-RISE Mo+Cu (O-RISE MOLYBDENUM+COPPER Mono-plus fertilizer) in liquid form with high concentration of molybdenum in organic form and copper in chelate form coupled with humic, fulvic and amino acids.
quality. efficiency.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
премиум-удобрения о-райз
O-RISE premium fertilizers
O-RISE GOLF – is professional fertilizer for golf courses and sports stadiums (because of the slow release of nutrients).
SPECIAL COMPOSITION provides a constant and uniform growth of grass, healthy green color, enhanced development of the root system, provides resistance to exhaustion. The introduction of organmineral fertilizer the basis of agrotechnical care of sports fields with natural grass, which regulates the provisions of State Standard 58157-2018. The use of O-RISE GOLF provides the plant with important nutrients that are necessary for THE FORMATION OF A WEAR-RESISTANT COVER, to recover from damage. After using the product, the color of the grass improves. This is important for the appearance of the field.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
Special product O-RISE GREEN CITY – is a professional fertilizer in liquid form. It is used for landscape design and landscaping.
The ORIGINAL COMPOSITION of the product solves the problems of soil structures, low moisture capacity and microbiological activity in the city. Fertilizer O-RISE GREEN CITY adverse is excellent basis for plant nutrition with necessary nutrients. It has a set of microelements for plant protection from natural and man-made factors. The use of this fertilizer is safe for urban environment and people because of the ORGANIC BASE of the product.
for agricultural production.
fertilizer based on humic acids.
not limited.
3 years.
leaf feeding together with the NWR or self-application.
Rules for the use of tank mixture
The first rule is to shake the canister well
The second rule IS TO DO A COMPATIBILITY TEST
Before pouring the preparations into the sprayer tank, conduct a compatibility test – we pour water into the container with the lid (the water must be from the same source as in the sprayer), add the preparations – components of the tank mixture in ratios corresponding to field flow rates. We close the container and mix the contents, turn the container over for 3-5 minutes. The uniformity of the mixture is evaluated visually.
The third rule is to WATCH THE REACTION
Mixing two drugs leads to a certain physical and chemical reaction.
The fourth rule is TO PREPARE THE MOTHER LIQUOR
One part of the drug is dissolved in one part of pure water.
In the tank, we combine only the uterine solutions of the drugs
The fifth rule is THAT WE OBSERVE THE TECHNOLOGY OF PREPARING THE TANK MIXTURE
- we mix the preparations in strict order
- the working solution is prepared immediately before use
- the finished working solution or its residues after application should not be left in the sprayer
- we do not stop mixing the working solution throughout its preparation, as well as during spraying in the field
- we carefully monitor the quality and temperature of the water used
Preparation of the working fluid
- Before starting the treatment, fill the tank of the sprayer (etching machine) with clean water up to half
- Turn on the stirrer
- Add a measured dose of O-Rise preparations to the mixing tank
- Make a SPR (according to the manufacturer’s recommendations)
- Fill the tank to full.
Optimal conditions for crop treatments
- Relative humidity of the air is not less than 60%
- Temperature — 15-25°С
- Wind speed – no more than 2m/s
преимущества удобрений о-райз
advantages of fertilizers O-RISE
Increases resistance to weather conditions.
Stimulation of root system development, photosynthesis intensity.
Prevention of formation of non-protein forms of nitrogenous compounds.
Improved flowering and fruit quality.
Elimination of micronutrient deficiencies.
Improved protein and carbohydrate metabolism.
Lorem..
Lorem..
Есть вопросы?
Any questions?
WhatsApp / Telegram
department of agricultural support
- 8 865 256 6999
- +7 (928) 008-60-28
- organohelat@gmail.com
- 355029, Russia, Stavropol Territory, city of Stavropol, Lenin street, 452 A
355029, Россия, г.Ставрополь, ул.Ленина, д.452А